The all-new KV series is equipped with HD+HR technology, which has ultra-high resolution and super dynamic performance, reproducing subtle changes in sound details, clear and delicate sound quality, rich in grain sense, and abundant dynamic energy, making it the best choice for Party K. The KV series is the most high-end luxury flagship product in the industry, covering all necessary power in the 800W-1500W range.
Ultra low noise cooling system
The new KV series is equipped with a noiseless cooling system, which enables the power amplifier to maintain safe and stable temperature operation even in high temperature environments, and can be operated under the background noise that is not Attention seeking. The design of this noise free cooling system allows even high-power amplifiers to be installed in a noisy and sensitive area without worrying about causing any interference noise.
- Class 2H (KV8) and Class I ™ (KV10/KV12/KV15) power amplifier module.
- High quality circular transformer power supply
- XL Yangyu inlet socket and connecting socket; SpeakON NL4 output socket
- The front panel has independent channels for power, protection, peak shaving warning, and signal light indicators
- The rear panel has connection mode selection (stereo/bridge/parallel)
- The rear panel has input sensitivity selection (0.775V/1.0V/32dB)
- The rear panel has a power circuit breaker
| Model | KV8 | KV10 | KV12 | KV15 |
| Output power (AC 220V / 50Hz. ±10％, All channels driven output power, THD=1%) | ||||
| 8Ω stereo | 800W x2 | 1000W x2 | 1200W x2 | 1500W x2 |
| 4Ω stereo | 1200W x2* | 1400W x2* | 1800W x2* | 2200W x2* |
| 8Ω bridge | 2400W* | 2800W* | 3500W* | 4400W* |
| Other specification | ||||
| Frequency response | 20Hz-20kHz(+0/-1dB) | |||
| THD+N | ≤0.06% | ≤0.03% | ≤0.03% | ≤0.03% |
| S/N rate | ≥100dB | ≥100dB | ≥100dB | ≥100dB |
| Input sensitivity | 0.775V/1.0V/32dB | |||
| Input impedance(bal/unbal) | 20kΩ/10kΩ | |||
| Voltage gain | 40.3dB | 41.2dB | 42dB | 43dB |
| Output circuitry | Class 2H | Class I™ | Class I™ | Class I™ |
| Connect | ||||
| Input section | Balanced input XLR female socket/balanced parallel connection XLR male socket | |||
| Output section | SPEAKON speaker spiral seat | |||
| Function | ||||
| Front panel indication | Power/signal/peak shaving voltage limit/protection | |||
| Front panel | Standby breathing light/illuminated brand/twist power switch/volume control knob | |||
| Rear panel | Stereo/parallel/bridge selection switch, sensitivity selection switch, independent circuit breaker | |||
| Size/Weight | ||||
| Product size | 483x364x89 | 483x415x89 | 483x414x89 | 483x414x89 |
| Product packaging size | 565x530x170 | 595x565x170 | 595x565x170 | 595x565x170 |
| The above packing dimensions, net weight, and gross weight are for reference only. The accurate values are subject to the identification on the batch of products. | ||||
Remark：
1、*,The power is tested under the condition of 40ms burst,1kHz sine wave and 1% THD.
2、**,The power is tested under the condition of 20ms burst,1kHz sine wave and 1% THD.
3、Other power is tested under EIA standard.
4、Soundstandard reserves the right to make any changes to the product specifications without prior notice. Final specifications to be found in the user manual.